| IMPORTANT: You will require the latest Omada Controller software to continue. |
Open a web browser and log in to your Omada v4 controller
Step 1 - Wireless Settings
Click Wireless Settings from the bottom menu then click Add. Configure with:
| SSID | Guest WiFi (or whatever you wish) |
| Band | 2.4GHz and 5GHz |
| Guest Network | Enabled |
| Security Mode | None |
Click Apply to save.
Step 2 - Guest Portal
On the Wireless Control tab select the Portal header. Click Add a New Portal and configure with:
| Portal Name | guestwifi |
| SSID | select the SSID you just created |
| Authentication Type | External RADIUS Server |
| Authentication Timeout | 8 Hour |
| RADIUS Server IP | *insert radius_server_ip here* |
| RADIUS Port | 1812 |
| RADIUS Password | *insert radius_secret here* |
| Authentication Mode | PAP |
| NAS ID | guestwifi |
| RADIUS Accounting | Enable |
| Accounting Server IP | *insert radius_server_ip here* |
| Accounting Server Port | 1813 |
| Accounting Server Password | *insert radius_secret here* |
| Interim Update | Enable |
| Interim Update Interval | 120 |
| Portal Customization | External Web Portal |
| External Web Portal URL | *insert access_url here* |
| HTTPS Redirect | Disable |
| Landing Page | The Promotional URL |
| Promotional URL | *insert redirect_url here* |
Click Apply to save.
Step 3 - Walled Garden
Next, click the Access Control header. Configure with:
| Pre-authentication Access | Enable |
Under Pre-Authentication Access List add each required domain, i.e.
| Type | URL |
| URL | *insert domain here* |
| Status | Enable |
Please refer to this list.
Click Apply to save.
| SecurePass Note: To enable our SecurePass WiFi solution please complete the steps below. This enables a secure, seamless WiFi connection for repeat users. |
Secure WiFi Configuration
On the left menu, go to Settings > Network Profile > RADIUS. Click Create New RADIUS Profile and configure with:
| Name: | radsecure |
| Authentication Server IP/URL: | 34.150.158.147 |
| Authentication Port: | 1812 |
| Authentication Password: | *insert radius_secret here* |
Click the + Add New Authentication Server and add the secondary server:
| Authentication Server IP/URL: | 34.86.212.67 |
| Authentication Port: | 1812 |
| Authentication Password: | *insert radius_secret here* |
Configure the following:
| RADIUS Accounting: | Enable |
| Accounting Server IP/URL: | 34.150.158.147 |
| Accounting Port: | 1813 |
| Authentication Password: | *insert radius_secret here* |
Click the + Add New Accounting Server and add the secondary server:
| Accounting Server IP/URL: | 34.86.212.67 |
| Accounting Port: | 1813 |
| Authentication Password: | *insert radius_secret here* |
Configure the following:
| Interim Update: | Enable |
| Interim Update Interval: | 240 |
Click Save to confirm.
Next, go to Settings > Wired & Wireless Networks > WLAN. Click Create New Wireless Network and configure with:
| Network Name (SSID): | Purple |
| Security: | WPA-Enterprise |
| RADIUS Profile: | radsecure |
| NAS ID: | Default |
| Hotspot 2.0 | Enable |
| Network Type: | Free Public Network |
| Operator Domain | securewifi.purple.ai |
| Operator Friendly Name | Purple |
| Internet | Enable |
| Network Availability IPv4 | Single NATed private IPv4 address |
| NAI Realm list: | Click Add New Realm |
| Realm name: | securewifi.purple.ai |
| Realm Encoding: | RFC4282 |
| EAP Method: | EAP-TTLS |
| Authentication param | Non-EAP Inner Authentication Type - PAP |
Click Confirm and then Apply to save.
Configuration Complete
The configuration is now complete.
Free Guest WiFi
Purple App
SecurePass
Splash Access