Allied Telesis TQ Series AP

  • Updated

Supported Models:

  • AT-TQ1402 Series: 6.0.1-7.1
  • AT-TQ5403 Series: 6.0.1-4.1
  • AT-TQ6602 Series (GEN1): 7.0.1-2.1
  • AT-TQ6602 Series (GEN2): 8.0.1-1.1
  • AT-TQ6702 Series (GEN2): 8.0.1-1.1

Logging in

Log in to your Allied Telesis AP web interface.

Captive Portal

On the left menu, click Settings > VAP / Security. Then, click VAP0 or whichever VAP you wish to use and configure with:

On the Virtual Access Point tab:

Status Enabled
Mode Access Point
SSID Guest WiFi (or whatever you wish)
Hidden SSID Disabled
MAC Filtering Disabled
Captive Portal External Page Redirect
External Page URL *insert access_url here*
Redirect Type Fixed URL
Fixed URL *insert redirect_url here*
Primary RADIUS Server IP *insert radius_server_ip here*
Primary RADIUS Server Key *insert radius_secret here*
RADIUS Port 1812
Secondary RADIUS Server IP *insert radius_server2_ip here*
Secondary RADIUS Server Key *insert radius_secret here*
RADIUS Port 1812
RADIUS Accounting Enabled
RADIUS Accounting Port 1813
Walled Garden Add the required domains one by one. Please refer to this list.

Security

On the Security tab:

Mode None

Click Save & Apply to confirm.

Note: Please be sure to configure ALL radios on the Access Point with the same settings as above, for example Radio 1, Radio 2, and Radio 3 depending on your model.

Configuration Complete

The configuration is now complete.

Share online:
Was this article helpful?
0 out of 0 found this helpful