Welcome to Purple Support

D-Link Nuclias Cloud

  • Updated

Logging in

Log in to your Nuclias Cloud portal.

RADIUS

At the top, click Configure > Access point > RADIUS servers. Then, click Add a RADIUS server and configure with:

RADIUS server name: guest1_auth
Host: *insert radius_server_ip here*
Port: 1812
Secret: *insert radius_secret here*
Access level: Organization

Click Save to add the RADIUS server. Next, click Add as RADIUS server again and configure with:

RADIUS server name: guest1_acct
Host: *insert radius_server_ip here*
Port: 1813
Secret: *insert radius_secret here*
Access level: Organization

Click Save to add the RADIUS server. Next, click Add as RADIUS server again and configure with:

RADIUS server name: guest2_auth
Host: *insert radius_server2_ip here*
Port: 1812
Secret: *insert radius_secret here*
Access level: Organization

Click Save to add the RADIUS server. Next, click Add as RADIUS server again and configure with:

RADIUS server name: guest2_acct
Host: *insert radius_server2_ip here*
Port: 1813
Secret: *insert radius_secret here*
Access level: Organization

Click Save to add the RADIUS server.

Walled garden

At the top, click Configure > Access point > Walled garden. Then, click Add a walled garden and configure with:

Walled garden name: guest
Range: Add the required domains one by one. Please refer to this list.

Press Save to confirm.

SSID

At the top, click Configure > Access point > Profiles and then SSID beside the AP profile you are using. Then, click Add SSID and configure with:

SSID name: Guest WiFi (or whatever you wish)
Band selection: 2.4GHz and 5GHz

Press Save to confirm. Next, on the SSID you just created and configure with:

Security: Open
Broadcast SSID: Enable
Guest Access mode: Enable
NAT mode: Enable
Station isolation: Enable

Press Save to confirm. Next, click on the Captive Portal tab and configure with:

Captive portal: Sign-on with External Captive Portal
Option: Custom External Captive Portal
Splash page URL: *insert access_url here*
Primary RADIUS server: *insert radius_server_ip here*:1812
Secondary RADIUS server: *insert radius_server2_ip here*:1812
Primary accounting server: *insert radius_server_ip here*:1813
Secondary accounting server: *insert radius_server2_ip here*:1813
Session timeout: 240 minutes
Idle timeout: 60 minutes
Walled garden: guest

Click Save to confirm. Finally, click PUSH CONFIGURATION at the top to deploy the configuration to your AP(s).

Configuration Complete

The configuration is now complete.

Share online:
Was this article helpful?
0 out of 0 found this helpful