Supported models and firmware versions:
WAP125: 1.0.1.7 or above
WAP150: 1.1.2.4 or above
WAP361: 1.1.2.4 or above
WAP571: 1.1.0.3 or above
WAP581: 1.0.1.5 or above
Start by logging into your Cisco WAP web interface.
Step 1 - Guest Access
Click Access Control > Guest Access on the left menu. Configure with:
Enable
Yes
Guest Access Instance
guestwifi
Protocol
HTTP (80)
Authentication Method
External Captive Portal
Guest Group
Default
Session Timeout
1440
Press Apply to Save.
Beside the Authentication Method option, click the eye icon to edit. Configure with:
Splash Page URL
*insert access_url here*
Walled Garden
Please refer to this list.
Server IP Address-1
*insert radius_server_ip here*
Server IP Address-2
*insert radius_server2_ip here*
Key-1
*insert radius_secret here*
Key-2
*insert radius_secret here*
RADIUS Accounting
Enable
Click Ok to Save.
Note: Check the Protocol setting is still set to HTTP (80) and not HTTPS (443). Click Apply again to Save.
Step 2 - Wireless
Click Wireless > Networks on the left menu and on the Radio 1 tab click the Plus icon. Configure with the below settings:
VLAN ID
1 (or whaver you need)
SSID Name
Guest WiFi (or whatever you wish)
SSID Broadcast
Enabled
Security
None
Guest Access Instance
guestwifi
Click Apply to Save. Follow the same procedure for the Radio 2 tab.
The configuration is now complete.