Cisco Small Business (WAP) Series

  • Updated

Supported Models and Firmware Versions:

  • WAP125: 1.0.1.7 or above
  • WAP150: 1.1.2.4 or above
  • WAP361: 1.1.2.4 or above
  • WAP571: 1.1.0.3 or above
  • WAP581: 1.0.1.5 or above

Logging in

Start by logging into your Cisco WAP web interface.

Guest Access

Click Access Control > Guest Access on the left menu. Configure with:

Enable Yes
Guest Access Instance guestwifi
Protocol HTTP (80)
Authentication Method External Captive Portal
Guest Group Default
Session Timeout 1440

Press Apply to Save.

Beside the Authentication Method option, click the eye icon to edit. Configure with:

Splash Page URL *insert access_url here*
Walled Garden Please refer to this list.
Server IP Address-1 *insert radius_server_ip here*
Server IP Address-2 *insert radius_server2_ip here*
Key-1 *insert radius_secret here*
Key-2 *insert radius_secret here*
RADIUS Accounting Enable

Click Ok to Save.

Note: Check the Protocol setting is still set to HTTP (80) and not HTTPS (443). Click Apply again to Save.

Wireless

Click Wireless > Networks on the left menu and on the Radio 1 tab click the Plus icon. Configure with the below settings:

VLAN ID 1 (or whatever you need)
SSID Name Guest WiFi (or whatever you wish)
SSID Broadcast Enabled
Share online:
Was this article helpful?
0 out of 0 found this helpful