Welcome to Purple Support

IgniteNet Spark/SunSpot/SkyFire

  • Updated

Please log in to the AP web interface and then on the left click on Network > Hotspot Settings.

Configure as per below:

  • Enable Hotspot Service: Enabled
  • Network IP: 10.1.0.1
  • Network mask: 255.255.255.0
  • DHCP Start: 10
  • DHCP End: 254
  • DHCP Lease Time: 1800
  • DNS 1: 8.8.8.8
  • DNS 2: 8.8.4.4
  • RADIUS Server 1: *insert radius_server here*
  • RADIUS Server 2: *insert radius_server2 here*
  • RADIUS Shared Secret: *insert radius_secret here*
  • RADIUS Auth Port: 1812
  • RADIUS Acct Port: 1813
  • RADIUS Auth Method: PAP
  • Captive Portal URL: *insert access_url here*
  • Captive Portal Secret: *insert uam_secret here*

Walled
Garden      

*insert access_domain here*
venuewifi.com
openweathermap.org
cloudfront.net

stripe.com


If you wish to support social network logins, you also need to add the domains below for each network you plan to support, to the end of the 'Walled Garden' list above, ensuring a comma is separating each entry.

Facebook facebook.com
fbcdn.net
akamaihd.net
connect.facebook.net
Twitter twitter.com
twimg.com
LinkedIn linkedin.com
licdn.net
licdn.com
Instagram instagram.com
Weibo weibo.com
login.sina.com.cn
VKontakte vk.me
vk.com

 

Click on Save.

Next, click on Wireless on the left and for each Radio in your AP (i.e. Radio #0 5GHz) you need to create an SSID. Under Wireless Networks choose the Add SSID tab. Configure as per below:

  • Status: On
  • SSID: Guest WiFi (or whatever you wish)
  • Broadcast: Ticked
  • Client Isolation: On     
  • Method: No Security
  • Network Behavior: Hotspot Controlled
Click on Save.
Share online:
Was this article helpful?
0 out of 0 found this helpful