Welcome to Purple Support

Sierra Wireless AirLink

  • Updated

Log in to your Sierra Wireless web interface.

Note: Captive portal is only available on SSID 1, and only available when the Wi-Fi mode is set to Access Point (LAN).

At the top, click Wi-Fi > General. Configure with:

Wi-Fi mode
Access Point (LAN)

Click Apply to save. Next, edit SSID 1 and scroll down to the Captive Portal section. Configure with:

Captive Portal
Enable
UAM Server
*insert access_url here*
UAM Secret Shared
*insert uam_secret here*
DNS mode
Auto
NAS ID
guestwifi
RADIUS Server IP
*insert radius_server_ip here*
RADIUS Server Authentication Port
1812
RADIUS Server Accounting Port
1813
MAC Authentication Mode
Local
List of URLs always accessible

Add the following entries one by one:


*insert access_domain here*

venuewifi.com

openweathermap.org

cloudfront.net

stripe.com

 

Note: If you wish to support social network logins, you also need to add the below entries for each network you plan to support.

 

Facebook:

facebook.com

fbcdn.net

akamaihd.net

connect.facebook.net

 

X:

twitter.com

twimg.com

 

LinkedIn:

linkedin.com

licdn.net

licdn.com

 

Instagram:

instagram.com

Click Restart or reboot the device to commit changes.

 

The configuration is now complete.

 

Share online:
Was this article helpful?
0 out of 0 found this helpful