Welcome to Purple Support

Cisco Meraki Go

  • Updated
Meraki Go APs do not support RADIUS authentication and accounting. Therefore, some reports in the portal like users online now and network reports will be unavailable. Tiered Bandwidth is also unavailable.

Open the Meraki Go app on your phone

Step 1 - Wireless Settings

Press the Settings icon at the bottom and then press WiFi network. Edit an existing network you wish to use or Add a new network. Configure with:

Network Name
Guest WiFi (or whatever you wish)
Password
Leave blank (no password)
Guest network
Enabled

Press Save to confirm.

Step 2 - Guest Portal

On the SSID settings page press the Landing page option. Press Externally hosted and configure with:

Website
*insert access_url here*
Timeout Frequency
Every four hours
Walled Garden

Add the following entries:

*.*insert access_domain here*

*.venuewifi.com

*.openweathermap.org

*.cloudfront.net

*.stripe.com

 

Note: If you wish to support social network logins, you also need to add the below entries for each network you plan to support.

 

Facebook:

*.facebook.com

*.fbcdn.net

*.akamaihd.net

connect.facebook.net

 

Twitter:

*.twitter.com

*.twimg.com

 

LinkedIn:

*.linkedin.com

*.licdn.net

*.licdn.com

 

Instagram:

*.instagram.com

Redirect to Website
*insert redirect_url here*

Press Save to confirm and then return to the WiFi network settings. Configure with:

Active
Enabled
Guest Network
Enabled
Discoverable
Enabled

 

The configuration is now complete.

 

Share online:
Was this article helpful?
0 out of 0 found this helpful