Logging in
Start by logging into your Altai Technologies AP.
WLAN
Click Configuration > Wireless on the top menu. Under the WLAN tab, click the More... link beside the WLAN you wish to use.
On the WLAN General tab:
| Enable WLAN: | Yes |
| SSID: | Guest WiFi (or whatever you wish) |
On the WLAN Security tab:
| Authentication Mode: | Open |
| Cipher Mode: | Disabled |
On the Portal tab:
| Enable Portal: | Yes |
| DHCP Lease Time: | 3600 |
| Portal URL: | *insert access_url here* |
| Portal Secret: | *insert uam_secret here* |
| Primary RADIUS Server: | *insert radius_server_ip here* |
| Secondary RADIUS Server: | *insert radius_server2_ip here* |
| RADIUS Shared Secret: | *insert radius_secret here* |
| RADIUS Auth Port: | 1812 |
| RADIUS Acct Port: | 1813 |
| Enable Portal ACL: | Yes |
| Portal ACL File: | Save the required domain list to a text file, then upload. Remember to click Install
Important Note: Each domain needs to be prefixed with 'w ' - i.e. w purpleportal.net. This is correct, please leave intact. Please refer to this list.
|
Click Submit to Save. Finally, click Save & Apply at the top right.
Configuration Complete
The configuration is now complete.