Altai Technologies AP

Logging in

Start by logging into your Altai Technologies AP.

Click Configuration > Wireless on the top menu. Under the WLAN tab, click the More... link beside the WLAN you wish to use.

On the WLAN General tab:

Enable WLAN	Yes
SSID	Guest WiFi (or whatever you wish)

On the WLAN Security tab:

Authentication Mode	Open
Cipher Mode	Disabled

On the Portal tab:

Enable Portal	Yes
DHCP Lease Time	3600
Portal URL	insert access_url here
Portal Secret	insert uam_secret here
Primary RADIUS Server	insert radius_server_ip here
Secondary RADIUS Server	insert radius_server2_ip here
RADIUS Shared Secret	insert radius_secret here
RADIUS Auth Port	1812
RADIUS Acct Port	1813
Enable Portal ACL	Yes
Portal ACL File	Save the required domain list to a text file, then upload. Remember to click Install. Important Note: Each domain needs to be prefixed with 'w ' - i.e. w purpleportal.net. This is correct, please leave intact. Please refer to this list.

Click Submit to Save. Finally, click Save & Apply at the top right.

The configuration is now complete.