Welcome to Purple Support

Everest Networks AP

  • Updated

Logging in

Open a web browser and log in to your Everest Cloud (BaseCamp).

Wireless Network

Click Wireless Networks on the left menu, then Add at the top right. Configure with:

Network Name: Guest WiFi
SSID: Guest WiFi (or whatever you wish)
Security: Open
Captive Portal Enabled: Yes
Enter splash URL: *insert access_url here*
Session Timeout: 86400
Select Third Party Integrator: Purple

Under Primary RADIUS Authentication Server

IP Address: *insert radius_server_ip here*
Port: 1812
Shared Secret: *insert radius_secret here*
Confirm Shared Secret: as above

Under Primary RADIUS Accounting Server

IP Address: *insert radius_server_ip here*
Port: 1813
Shared Secret: *insert radius_secret here*
Confirm Shared Secret: as above

Under Secondary RADIUS Authentication Server

IP Address: *insert radius_server2_ip here*
Port: 1812
Shared Secret: *insert radius_secret here*
Confirm Shared Secret: as above

Under Secondary RADIUS Accounting Server

IP Address: *insert radius_server2_ip here*
Port: 1813
Shared Secret: *insert radius_secret here*
Confirm Shared Secret: as above

Click Save at the top right.

Walled Garden

Click Walled Garden at the top and add the required domains. Please refer to this list.

Finally, click into the Wireless Network (Guest WiFi) you just created, select the APs you wish to use this configuration, and then click Apply to APs at the top.

Configuration Complete

The configuration is now complete.

Share online:
Was this article helpful?
0 out of 0 found this helpful