| Please note: You need firmware version 3.5.4 or above to continue. |
Logging in
Log in to your Pepwave AP One web interface.
Click AP at the top and then New SSID. Configure with the following settings:
Under SSID Settings
| Enable | Enabled (ticked) |
| Radio Selection | 2.4GHz and 5GHz |
| SSID | Guest WiFi (or whatever you wish) |
| Broadcast SSID | Enabled (ticked) |
Under Security Settings
| Security Policy | Open (No Encryption) |
Under Captive Portal
| Captive Portal | Enable |
| Authentication Method | RADIUS |
| RADIUS Security | PAP |
| Splash Page | *insert access_url here* |
| Landing Page | Enabled (ticked) |
| Landing Page URL | *insert redirect_url here* |
| Profile MAC Address | LAN MAC Address |
| Allowed Domains / IPs | Enter the required domains one per line. Please refer to this list. |
Under RADIUS Server Settings (Primary Server)
| Host | *insert radius_server_ip here* |
| Secret | *insert radius_secret here* |
| Authentication Port | 1812 |
| Accounting Port | 1813 |
Under RADIUS Server Settings (Secondary Server)
| Host | *insert radius_server2_ip here* |
| Secret | *insert radius_secret here* |
| Authentication Port | 1812 |
| Accounting Port | 1813 |
Under Guest Protect
| Block LAN Access | Enabled (ticked) |
Click Save to confirm.
At the top right, click Apply Changes to complete.
Configuration Complete
The configuration is now complete.
Free Guest WiFi
Purple App
SecurePass
Splash Access