Welcome to Purple Support

HP Cloud Managed AP

  • Updated

Wireless Configuration

Under Wireless Configuration on the left choose Networks.

Click on Create New and configure as per below:

Type Wireless
Name (SSID) Guest WiFi
Primary Usage Guest

Click Next and configure with the following:

Client IP Assignment Virtual Controller Assigned

Click Next and configure with the following:

Splash Page Type External
Captive Portal Profile Choose New...

Configure with:

Name guestwifi
Type Radius Authentication
IP or Hostname *insert access_domain here*
URL /access/
Port 80
Use HTTPS Disabled
Captive Portal Failure Deny Internet
Automatic URL Whitelisting Disabled
Redirect URL *insert redirect_url here*

Click Save.

WISPr: Disabled

Encryption: Disabled

MAC Authentication: Disabled

Authentication Server 1: Choose New... and configure with:

Name guestwifi1
IP Address *insert radius_server_ip here*
Shared Key *insert radius_secret here*
Retype Key as above

All other values should be left at their defaults.

Click Save Server.

Authentication Server 2: Choose New... and configure with:

Name guestwifi2
IP Address *insert radius_server2_ip here*
Shared Key *insert radius_secret here*
Retype Key as above

All other values should be left at their defaults.

Click Save Server.

Load Balancing: Disabled

Reauth Interval: 24 hrs

Accounting: Enabled

Accounting Mode: Authentication

Accounting Interval: 3 min

Blacklisting: Disabled

Walled Garden: Click on 0 blacklist, 0 whitelist and configure with:

Under Whitelist click on New and enter the required domains, one by one. Please refer to this list.

Click on OK to add each one and then add the next until you have all the domains listed.

Click on Next.

Access Rules: Role Based

Under Role click on New and enter Preauth as the Name. Click OK to add.

Now, under Access Rules for Selected Roles click on the Plus icon.

You will need to add a new rule one by one for each of the following as per the domain list you added earlier:

Access Control Network Any Allow To a Domain Name: *insert domain here*

Click Save for each, then add the next until all are listed.

Finally, add the following rule:

Access Control Network Any Deny To All Destinations

Now, under the Role on the left choose default_wired_port_profile, and tick the box Assign Pre-authentication Role and select Preauth.

Share online:
Was this article helpful?
0 out of 0 found this helpful