Welcome to Purple Support

On Networks N150R

  • Updated

Please connect an Ethernet cable from your existing modem/router/network in to the WAN port on the back of the router.

Connect an Ethernet cable between port 1 on the back of the router and your computer

Turn on the router and wait for a few minutes

Open a web browser and type http://192.168.1.1 in to the address bar

The default username is "admin" and the password is "admin" (unless you have changed these prior).


Click on Management and then Update Firmware, click on "Browse" and select the firmware file that you have been provided.



Click on Upload and Click Yes. The upgrade process will now begin and take up to 5 minutes to complete.

    Share online:
    Was this article helpful?
    0 out of 0 found this helpful