Cradlepoint AER/CBR/IBR/MBR Series

  • Updated

Logging in

Please log in to your Cradlepoint Router.

Wireless Settings

At the top, click on Network Settings and choose WiFi / Local Networks.

At the bottom of the page, select which Wireless Profile you wish to use and click Edit.

Configure with:

WiFi Name (SSID) Guest WiFi (or whatever you wish)
Hidden Unticked
Isolate Ticked
WMM Ticked
Enabled Ticked
Security Mode Open

Click Submit to save.

Guest LAN Configuration

Next, on the same page, above the Wireless Profiles, tick the box beside the Guest LAN network and click Edit.

Configure with:

IPv4 Settings tab

IPv4 Routing Mode Hotspot

IPv6 Settings tab

IPv6 Address Source None

Interfaces tab

WiFi: Guest WiFi Click the + to move it to the Selected list

IPv4 DHCP tab

DHCP Server Ticked

Click Submit to save.

Hotspot Services

Next, click on System Settings at the top and choose Hotspot Services. Configure with:

Under Hotspot Settings

Hotspot Mode RADIUS/UAM
Local IP Network Guest LAN
Allow Service on 3G/4G modems Ticked
Redirect HTTPS Requests Unticked
Hotspot/UAM Authentication Port 8000

Under RADIUS Settings

Server Address 1 *insert radius_server here*
Server Address 2 *insert radius_server2 here*
Authentication Port 1812
Accounting Port 1813
Shared Secret *insert radius_secret here*
Confirm Secret as above
Redirect Successful Authenticate Select To an administrator-defined URL and enter:
*insert redirect_url here*
Session Timeout 240 Mins
Idle Timeout 30 Mins

Under UAM Settings

Login URL *insert access_url here*
Splash Page URL leave empty
Shared Secret *insert uam_secret here*
Confirm Secret as above

Next, under Allowed Hosts/Domains Prior to Authentication click the Add button and add each of the required domains. Please refer to this list.

Click Apply to Save.

Share online:
Was this article helpful?
0 out of 0 found this helpful