Relay2 RA-100

  • Updated

Logging in

Please log in to the Relay2 web interface at https://www.relay2.net/.

WLAN Configuration

Click on Configure > WLAN at the top, then click Add New. Configure with the below settings:

Profile Name guestwifi
SSID Guest WiFi (or whatever you require)
Enabled Ticked
Broadcast SSID Ticked
Radio Policy All
WLAN Type Guest WLAN
Portal URL *insert access_url here*
Allowed Domain Please refer to this list.

RADIUS Auth Server 1

Click Add New, configure with the following, and click Add to save:

Server Type Authentication
Server Address *insert radius_server_ip here*
Shared Secret Format ASCII
Shared Secret *insert radius_secret here*
Shared Secret Confirm as above
Server Port 1812
Retransmit Timeout 2

RADIUS Auth Server 2

Click Add New, configure with the following, and click Add to save:

Server Type Authentication
Server Address *insert radius_server2_ip here*
Shared Secret Format ASCII
Shared Secret *insert radius_secret here*
Shared Secret Confirm as above
Server Port 1812
Retransmit Timeout 2

RADIUS Acct Server 1

Click Add New, configure with the following, and click Add to save:

Server Type Accounting
Server Address *insert radius_server_ip here*
Shared Secret Format ASCII
Shared Secret *insert radius_secret here*
Shared Secret Confirm as above
Server Port 1813
Retransmit Timeout 2

RADIUS Acct Server 2

Click Add New, configure with the following, and click Add to save:

Server Type Accounting
Server Address *insert radius_server2_ip here*
Shared Secret Format ASCII
Shared Secret *insert radius_secret here*
Shared Secret Confirm as above
Server Port 1813
Retransmit Timeout 2

Advanced Parameters

Session Timeout 1440
NAS-ID AP Name

Click Apply at the top right to save your structural changes.

Configuration Complete

The configuration is now complete.

Share online:
Was this article helpful?
0 out of 0 found this helpful