| NOTE: Before you begin, please ensure you have added your AP's Radio MAC's (as well as the normal AP MAC) to the portal "Hardware" screen, as these are required for authentication to work correctly. |
Logging in
Login to your WiNG controller and click on Configuration at the top.
On the left, click Captive Portals and choose Add.
Configure with the below settings:
| Captive Portal Server Mode | Internal (Self) |
| Connection Mode | HTTP |
| AAA Policy | Click the Add icon and enter the name of guestwifi before clicking Continue |
Next, on the RADIUS Authentication tab, click on Add and configure with:
| Host | *insert radius_server here* |
| Port | 1812 |
| Server Type | Host |
| Secret | *insert radius_secret here* |
Click OK to Add.
Next, on the RADIUS Accounting tab, click on Add and configure with:
| Host | *insert radius_server here* |
| Port | 1813 |
| Server Type | Host |
| Secret | *insert radius_secret here* |
Click OK to Add.
Next, on the Settings tab, configure with:
| Protocol | PAP |
| Accounting Packet Type | Start/Interim/Stop |
| Request Interval | 3 Minutes |
| Accounting Server Preference | Prefer Same Authentication Server Host |
| Format | Dash Delimiter |
| Case | Uppercase |
| Attributes | All |
Next, under the DNS Whitelist, click on the Add icon and enter a name of guestwifi.
You will now need to add each of the domains by clicking into the DNS Entry column and typing in each domain, clicking Add Row after each one. Please refer to this list.
| DNS Entry | *domain here* |
| Type | Hostname |
| Match Suffix | Yes |
Click OK when finished adding all the domains.
Enable RADIUS Accounting: Ticked
Press OK to Save.
Next, click on the Web Page tab and configure with the following:
| Web Page Source | Externally Hosted |
| Login URL | *insert access_url here*?login_ip=WING_TAG_CP_SERVER&motoapmac=WING_TAG_AP_MAC&client_mac=WING_TAG_CLIENT_MAC&random= |
| Welcome URL | *insert redirect_url here*&random= |
| Fail URL | *insert access_url here*?res=failed&random= |
Click OK to Save.
Next, click on Configuration at the top and choose the Wireless sub-tab underneath. Click on Add and configure with the following:
Basic Configuration
| SSID | Guest WiFi (or whatever you wish) |
| WLAN Status | Enabled |
| Broadcast SSID | Ticked |
Security
| Authentication | PSK / None |
| Captive Portal Enforcement | Captive Portal Enable (Ticked) |
| Captive Portal Policy | guestwifi |
| Select Encryption | Open |
Click OK to Save.
At the top right, click on Commit and Save.
Configuration Complete
The configuration is now complete.
Free Guest WiFi
Purple App
SecurePass
Splash Access