Click "Authentication" on the top menu.

Select "RADIUS Profiles" on the top sub menu and then click "Add New Profile".

Enter the following information:

• Profile Name: guestwifi
• Authentication port: 1812
• Accounting port: 1813
• Authentication method: PAP
  
  Under Primary RADIUS server, enter:
• Server address: *insert radius_server here*
• Secret: *insert radius_secret here*
• Confirm secret: As above
  
  

• Click Save

On the left menu, under Network Tree, click "VSCs" and then click "Add New VSC Profile". Set the correct settings:

Under Global:

• Profile Name: Free WiFi
• Use Controller for: Tick both Authentication and Access control
  
  Under Access Control:
• Present session and welcome page: Ticked
  
  Under Virtual AP:
• Name (SSID): Free WiFi (or whatever you want)
• Broadcast name (SSID): Ticked
  
  Under HTML-based user logins:
• HTML-based user logins: Ticked
• Authentication: Remote
• RADIUS: guestwifi
• RADIUS accounting: Ticked; choose guestwifi
  
  Under Location-aware:
• Called-Station-Id content: macaddress
  
  Under DHCP server:
• DNS: 10.1.0.1
• Start: 10.1.0.2
• End: 10.1.0.254
• Gateway: 10.1.0.1
• Netmask: 255.255.255.0
• Subnet: 10.1.0.0

Click Save.

Next, click Public access at the top, and ensure that "Access Control" is ticked.

Click Save.

Next, click on the "Web content" tab, and enter the following:
Support a local Welcome page: Unticked
Redirect users to the login page via: HTTP

Click Save

Next, click on Attributes at the top, and then under Configure Attributes click on Add New Attribute

IMPORTANT: You will need to add the below attributes one by one until you have all required domains listed. Please refer to this list. i.e

Name: ACCESS-LIST

Value: guestwifi,ACCEPT,all,*insert domain here*,all