Initial Setup
Configure your PC with a static IP address on the 192.168.2.0 subnet (e.g., 192.168.2.10) with a subnet mask of 255.255.255.0.
Connect the APC Ethernet interface into the same physical network switch or port as your PC. Wait a few minutes for the AP to completely boot up.
Open a web browser and navigate to http://192.168.2.66 via the address bar.
The default username is admin and the default password is admin01 (unless these credentials have been modified previously).
Network & Wireless Configuration
Click on the Configuration tab on the top menu and then select Network from the sub-menu below it. On the Network Mode drop-down menu, select Router.
Still within the Configuration tab, select Wireless from the sub-menu and set the SSID field to the specific wireless network name you wish to broadcast.
Security & UAM Settings
In the Security section, click the Security drop-down menu and choose UAM. Configure the section with the following values:
| Radius Server 1 | *insert radius_server here* |
| Radius Server 2 | *insert radius_server2 here* |
| Radius Secret | *insert radius_secret here* |
| Radius Auth Port | 1812 |
| Radius Acct Port | 1813 |
| Radius Web Page Type | External |
| UAM Login Page | *insert access_url here* |
| UAM Secret | *insert uam_secret here* |
DHCP Server Settings
| Interface IP Address | 10.1.0.1 |
| DHCP Server | 10.1.0.1 |
| Subnet Mask | 255.255.255.0 |
| DNS Server 1 | 10.1.0.1 |
In the White list section, add the required domains step-by-step by clicking the + icon to append entries. Please refer directly to this list for the exact values required.
Click on Apply & Save, then restart the hardware component to apply all configuration layers.
Configuration Complete
The configuration is now complete.
Free Guest WiFi
Purple App
SecurePass
Splash Access