NETGEAR Enterprise AP

  • Updated

Logging in

Open a web browser and log in to the Netgear Insight portal at https://insight.netgear.com/

SSID

At the top left, choose the correct location where you wish to create the SSID. Then, on the left menu, click WiFi > SSID and then Add. Configure with:

SSID Name: Guest WiFi (or whatever you wish)
Authentication Type: Open
VLAN ID: Select a VLAN or choose Management if default
Advanced Settings: Customize
Enable SSID: Yes
Broadcasting Selection: Broadcast
Captive Portal: click Add Captive Portal
Captive Portal Type: External Captive Portal
External Captive Portal services: GoZone Wi-Fi
Splash Page URL: *insert access_url here*
Captive Portal Authentication Type: RADIUS
NAS-Identifier: (leave as NONE)
Primary Authentication Server: IPv4 Address: *insert radius_server_ip here*
Port: 1812
Password: *insert radius_secret here*
Secondary Authentication Server: IPv4 Address: *insert radius_server_ip here*
Port: 1812
Password: *insert radius_secret here*
Primary Accounting Server: IPv4 Address: *insert radius_server2_ip here*
Port: 1813
Password: *insert radius_secret here*
Secondary Accounting Server: IPv4 Address: *insert radius_server2_ip here*
Port: 1813
Password: *insert radius_secret here*
Accounting Interval: 240
Failsafe: Disable
Walled Garden: Add the domains one by one, please refer to this list.

Click Save to apply changes.

The configuration is now complete.

Share online:
Was this article helpful?
0 out of 0 found this helpful