Click Wireless > Access Control on the left menu. From the SSID dropdown, choose the one you wish to use, then configure with the below settings:
| SSID (name): | Purple |
| SSID status: | Enabled |
| Security: | Enterprise with my RADIUS server |
| Wi-Fi Personal Network (WPN): | Disabled |
| WPA encryption: | WPA2 only |
| Splash page: | None |
Under RADIUS servers click Add server and add:
| Host IP or FQDN: | rad1-secure.purple.ai |
| Auth Port: | 2083 |
| Secret: | radsec |
| RadSec: | Enabled |
Click Add server again and add:
| Host IP or FQDN: | rad2-secure.purple.ai |
| Auth Port: | 2083 |
| Secret: | radsec |
| RadSec: | Enabled |
Under RADIUS accounting servers click Add server and add:
| Host IP or FQDN: | rad1-secure.purple.ai |
| Auth Port: | 2083 |
| Secret: | radsec |
| RadSec: | Enabled |
Click Add server again and add:
| Host IP or FQDN: | rad2-secure.purple.ai |
| Auth Port: | 2083 |
| Secret: | radsec |
| RadSec: | Enabled |
| Accounting interim interval: | 4 minutes |
| RADSec TLS idle timeout: | 15 minutes |
| RADIUS testing: | Disabled |
| RADIUS CoA support: | Disabled |
| RADIUS proxy: | Enabled |
Under Advanced RADIUS settings configure:
| NAS ID | **nasid** |
| Server timeout: | 5 seconds |
| Retry count: | 3 |
Click Save to save.
Hotspot 2.0 (Passpoint) Configuration
Click Wireless > Hotspot 2.0 on the left menu. From the SSID dropdown, choose your Secure SSID and configure with:
| Hotspot 2.0: | Enabled |
| Operator name: | PURPLE:GB |
| Venue Name: | (whatever you wish) |
| Venue type: | (whatever you wish) |
| Network type: | Private network |
| Domain List: | **realm** |
| NAI Realms: | Click Create realm and configure: • Format: 0 • Name: **realm** Click Add an EAP method and configure: • Method ID: 21 EAP-TTLS • Authentication Methods: PAP Click Save. |
Click Save Changes.
Configuration Complete
The configuration is now complete.
Free Guest WiFi
Purple App
SecurePass
Splash Access