Bienvenido a Soporte Purple

Allied Telesis TQ Series AP

  • Actualización
Supported models:

AT-TQ1402 Series: 6.0.1-7.1
AT-TQ5403 Series: 6.0.1-4.1
AT-TQ6602 Series (GEN1): 7.0.1-2.1
AT-TQ6602 Series (GEN2): 8.0.1-1.1
AT-TQ6702 Series (GEN2): 8.0.1-1.1


Log in to your Allied Telesis AP web interface.

Step 1 - Captive Portal

On the left menu, click Settings > VAP / Security. Then, click VAP0 or whichever VAP you wish to use and configure with:


On the Virtual Access Point tab:

Status
Enabled
Mode
Access Point
SSID
Guest WiFi (or whatever you wish)
Hidden SSID
Disabled
MAC Filtering
Disabled
Captive Portal
External Page Redirect
External Page URL
*insert access_url here*
Redirect Type
Fixed URL
Fixed URL
*insert redirect_url here*
Primary RADIUS Server IP
*insert radius_server_ip here*
Primary RADIUS Server Key
*insert radius_secret here*
RADIUS Port
1812
Secondary RADIUS Server IP
*insert radius_server2_ip here*
Secondary RADIUS Server Key
*insert radius_secret here*
RADIUS Port
1812
RADIUS Accounting
Enabled
RADIUS Accounting Port
1813
Walled Garden

Add the following entries one by one:


*insert access_domain here*

venuewifi.com

openweathermap.org

cloudfront.net

stripe.com


Note: If you wish to support social network logins, you also need to add the below entries for each network you plan to support.


Facebook:

facebook.com

fbcdn.net

akamaihd.net

connect.facebook.net


Twitter:

twitter.com

twimg.com


LinkedIn:

linkedin.com

licdn.net

licdn.com


Instagram:

instagram.com

On the Security tab:

Mode
None

Click Save & Apply to confirm.


Note: Please be share to configure ALL radio's on the Access Point with the same settings as above, for example Radio 1, Radio 2 and Radio 3 depending on your model.

The configuration is now complete.


Compartir en línea
¿Fue útil este artículo?
Usuarios a los que les pareció útil: 0 de 0