Logging in
Log in to your Nuclias Cloud portal.
RADIUS
At the top, click Configure > Access point > RADIUS servers. Then, click Add a RADIUS server and configure with:
| RADIUS server name: | guest1_auth |
| Host: | *insert radius_server_ip here* |
| Port: | 1812 |
| Secret: | *insert radius_secret here* |
| Access level: | Organization |
Click Save to add the RADIUS server. Next, click Add as RADIUS server again and configure with:
| RADIUS server name: | guest1_acct |
| Host: | *insert radius_server_ip here* |
| Port: | 1813 |
| Secret: | *insert radius_secret here* |
| Access level: | Organization |
Click Save to add the RADIUS server. Next, click Add as RADIUS server again and configure with:
| RADIUS server name: | guest2_auth |
| Host: | *insert radius_server2_ip here* |
| Port: | 1812 |
| Secret: | *insert radius_secret here* |
| Access level: | Organization |
Click Save to add the RADIUS server. Next, click Add as RADIUS server again and configure with:
| RADIUS server name: | guest2_acct |
| Host: | *insert radius_server2_ip here* |
| Port: | 1813 |
| Secret: | *insert radius_secret here* |
| Access level: | Organization |
Click Save to add the RADIUS server.
Walled garden
At the top, click Configure > Access point > Walled garden. Then, click Add a walled garden and configure with:
| Walled garden name: | guest |
| Range: | Add the required domains one by one. Please refer to this list. |
Press Save to confirm.
SSID
At the top, click Configure > Access point > Profiles and then SSID beside the AP profile you are using. Then, click Add SSID and configure with:
| SSID name: | Guest WiFi (or whatever you wish) |
| Band selection: | 2.4GHz and 5GHz |
Press Save to confirm. Next, on the SSID you just created and configure with:
| Security: | Open |
| Broadcast SSID: | Enable |
| Guest Access mode: | Enable |
| NAT mode: | Enable |
| Station isolation: | Enable |
Press Save to confirm. Next, click on the Captive Portal tab and configure with:
| Captive portal: | Sign-on with External Captive Portal |
| Option: | Custom External Captive Portal |
| Splash page URL: | *insert access_url here* |
| Primary RADIUS server: | *insert radius_server_ip here*:1812 |
| Secondary RADIUS server: | *insert radius_server2_ip here*:1812 |
| Primary accounting server: | *insert radius_server_ip here*:1813 |
| Secondary accounting server: | *insert radius_server2_ip here*:1813 |
| Session timeout: | 240 minutes |
| Idle timeout: | 60 minutes |
| Walled garden: | guest |
Click Save to confirm. Finally, click PUSH CONFIGURATION at the top to deploy the configuration to your AP(s).
Configuration Complete
The configuration is now complete.
Free Guest WiFi
Purple App
SecurePass
Splash Access