NOTE: You will require firmware version R_00.07.00 or above in order to continue
Log in to your Teltonika web interface. At the top, click Network > Wireless. Click Add and configure with:
- Enable wireless: Yes
Under Device Configuration
- SSID: Guest WiFi (or whatever you wish)
Under Interface Configuration
- Encryption: No encryption
Click Save. Next, at the top click Services > Hotspot. Click Edit beside your new SSID. Configure with:
On the General tab:
Under General Settings
- Configuration profile: Custom
- Enable: Yes
- AP IP: Leave default
- Logout IP: Leave default
- Authentication mode: External radius
- Authentication protocol: PAP
- RADIUS server #1: *insert radius_server here*
- RADIUS server #2: *insert radius_server2 here*
- Authentication port: 1812
- Accounting port: 1813
- Radius secret key: *insert radius_secret here*
- UAM port: Leave default
- UAM UI port: Leave default
- UAM secret: *insert uam_secret here*
- NAS Identifier: guest
- Swap octets: Yes
- External Landing Page: Yes
- Landing page address: *insert access_url here*
- HTTPS redirect: No
Under Walled Garden
Click Add and configure with:
- Enable: Yes
- Address: *insert access_domain here*
- Allow subdomains: Yes
Using the same procedure as above, add a new entry for the below domains:
- venuewifi.com
- cloudfront.net
- openweathermap.org
- stripe.com
If you wish to support social network logins, you also need to add the following domains for each network you plan to support
Facebook | facebook.com fbcdn.net akamaihd.net connect.facebook.net |
Twitter | twitter.com twimg.com |
LinkedIn | linkedin.com licdn.com |
Instagram | instagram.com |
Weibo | weibo.com sina.com.cn |
VKontakte | vk.me vk.com |
Click Save to apply.