Bienvenido a Soporte Purple

Draytek Vigor Series

  • Actualización

NOTE: The current supported models are: 2862, 3220, 2926, 2952, 2765, 2865, 2866, 2927, 2962, 3910 series.

 

Log in to your Draytek Web Interface and click Hotspot Web Portal >> Profile Setup on the left menu.

Click an available Index, i.e. 1 and configure with:

  • Enable this profile: Yes
  • Portal Method: External Server
  • Captive Portal URL: *insert access_url here*
  • Redirection URL: http://portal.draytek.com
  • Authentication Method: Click External RADIUS Server and set:
    - Enable: Yes
    - Server IP Address: *insert radius_server_ip here*
    - Destination Port: 1812
    - Shared Secret: *insert radius_secret here*
    - Confirm Shared Secret: as above
    - Enable Accounting: Yes
    - Accounting Port: 1813

    Click OK to Save
  • MAC Address Format: AA-BB-CC-DD-EE-FF

Click Save and Next. Now, click the Dest Domain tab and add the required domains, one per index. Please refer to this list.

Click Save and Next then configure with:

  • Expired Time After Activation: 0 days 6 hours 0 min (or whatever you wish)
  • HTTPS Redirection: No
  • Captive Portal Detection: Yes
  • Landing Page After Authentication: *insert redirect_url here*
  • Applied Interfaces: Select which SSID(s) you wish to enable the service on

 

Click Finish to Save. Please ensure you reboot the router before continuing as this is a pre-requisite for the setting to apply.

 

Compartir en línea
¿Fue útil este artículo?
Usuarios a los que les pareció útil: 0 de 0