Bienvenido a Soporte Purple

Pepwave MAX Series


Log in to your Pepwave MAX device web interface.


Click AP at the top and then New SSID. Configure with the following:


Under SSID Settings:

  • SSID: Guest WiFi (or whatever you wish)
  • Broadcast SSID: Enabled (ticked)

Under Security Settings:

  • Security Policy: Open (No Encryption)

Click Save. Next, click Network at the top then Captive Portal on the left. Configure with:

  • Enable: LAN
  • Access Mode: User Authentication
  • Authentication: RADIUS Server
  • Auth Server: *insert radius_server here*  Port: 1812
  • Auth Server Secret: *insert radius_secret here*
  • Accounting Server: *insert radius_server here*  Port: 1813
  • Accounting Server Secret: *insert radius_secret here*
  • Accounting Interim Interval: 180 seconds
  • Access Quota: 1260 minutes   0 MB
  • Inactive Timeout: 60 minutes
  • Allowed Domains / IPs: Enter the following domains one per line:

*insert access_domain here*

venuewifi.com

openweathermap.org

cloudfront.net

stripe.com


If you wish to support social network logins, you also need to add the domains below for each network you plan to support

Facebook Twitter LinkedIn Instagram
facebook.com
fbcdn.net
akamaihd.net
connect.facebook.net

twitter.com
twimg.com

linkedin.com
licdn.net
licdn.com

instagram.com
  • Splash Page: External URL: *insert access_url here*

Click Save to confirm.


At the top right, click Apply Changes to complete.


Compartir en línea
¿Fue útil este artículo?
Usuarios a los que les pareció útil: 0 de 0