Bienvenido a Soporte Purple

TP-Link Archer

Please connect an Ethernet cable from your existing modem/router/network in to the port labelled "Internet/WAN" on the back of the TP-Link

Connect an Ethernet cable between port 1 on the back of the TP-Link and your computer

Turn on the router and wait for a few minutes


Open a web browser and type http://192.168.0.1 in to the address bar


You will be prompted to log-in. The default username is "admin" and the password is "admin" (unless you have changed these prior).


Click on "Advanced" on the top menu:

S7gPB1PhZr6SV_qBZyXFDjA1cC-AEMPL6w.png


Click on "System Tools > Firmware Upgrade" on the left menu:

CPDMi2lFf5NrOySNLnwaT42rJXk1hBdSTg.png


Click on "Browse" and select the firmware file that you downloaded from the portal:


Click on "Upgrade" and press "OK" to confirm. The upgrade process will now begin and take up to 5 minutes to complete.


OrZ54ew4xu2QoVD-M8_78kmk46L5EaX1rA.png


 

Compartir en línea
¿Fue útil este artículo?
Usuarios a los que les pareció útil: 1 de 2