Important
You will need firmware version 3.1 or above in order to continue.
Logging in
Log in to your AP web interface and on the left menu choose Configure > WLAN. Click Create Wireless LAN at the top right.
Enter a WLAN ID (1 or above, whatever you have available). Configure with the following:
Basic Configuration
On the Basic tab:
Enable: | Enabled |
SSID: | Guest WiFi (or whatever you wish) |
VLAN: | 1 (or whatever you require) |
Security: | Open |
Radios: | 2.4GHz and 5GHz |
Max Clients: | 200 |
Client Isolation: | Enabled |
Click Save
Radius Server Configuration
On the Radius Server tab:
Authentication Server 1 Host: | *insert radius_server here* |
Authentication Server 1 Secret: | *insert radius_secret here* |
Authentication Server 1 Port: | 1812 |
Authentication Server 2 Host: | *insert radius_server2 here* |
Authentication Server 2 Secret: | *insert radius_secret here* |
Authentication Server 2 Port: | 1812 |
Accounting Server 1 Host: | *insert radius_server here* |
Accounting Server 1 Secret: | *insert radius_secret here* |
Accounting Server 1 Port: | 1813 |
Accounting Server 2 Host: | *insert radius_server2 here* |
Accounting Server 2 Secret: | *insert radius_secret here* |
Accounting Server 2 Port: | 1813 |
Accounting Mode: | start-interim-stop |
Server Pool Mode: | Failover |
Interim Update Interval: | 120 |
Click Save
Guest Access Configuration
On the Guest Access tab:
Enable: | Enabled |
Portal Mode: | External Hotspot |
Access Policy: | Radius |
Redirect Mode: | http |
External Page URL: | *insert access_url here* |
Success Action: | Redirect user to External URL |
Redirect URL: | *insert redirect_url here* |
Session Timeout: | 86400 |
Inactivity Timeout: | 1800 |
Click Save
White List Configuration
Next, under the Add White List header, add the required domains one at a time by clicking the Save button. Please refer to this list.