Bienvenido a Soporte Purple

IgniteNet Spark/SunSpot/SkyFire

  • Actualización

Please log in to the AP web interface and then on the left click on Network > Hotspot Settings.

Configure as per below:

  • Enable Hotspot Service: Enabled
  • Network IP:
  • Network mask:
  • DHCP Start: 10
  • DHCP End: 254
  • DHCP Lease Time: 1800
  • DNS 1:
  • DNS 2:
  • RADIUS Server 1: *insert radius_server here*
  • RADIUS Server 2: *insert radius_server2 here*
  • RADIUS Shared Secret: *insert radius_secret here*
  • RADIUS Auth Port: 1812
  • RADIUS Acct Port: 1813
  • RADIUS Auth Method: PAP
  • Captive Portal URL: *insert access_url here*
  • Captive Portal Secret: *insert uam_secret here*
  • Walled Garden: Please refer to this list.

Click on Save.

Next, click on Wireless on the left and for each Radio in your AP (i.e. Radio #0 5GHz) you need to create an SSID. Under Wireless Networks choose the Add SSID tab. Configure as per below:

  • Status: On
  • SSID: Guest WiFi (or whatever you wish)
  • Broadcast: Ticked
  • Client Isolation: On     
  • Method: No Security
  • Network Behavior: Hotspot Controlled
Click on Save.
Compartir en línea
¿Fue útil este artículo?
Usuarios a los que les pareció útil: 0 de 0