Log in to your Sierra Wireless web interface.
Step 1 - Captive Portal
Note: Captive portal is only available on SSID 1, and only available when the Wi-Fi mode is set to Access Point (LAN).
At the top, click Wi-Fi > General. Configure with:
Wi-Fi mode
Access Point (LAN)
Click Apply to save. Next, edit SSID 1 and scroll down to the Captive Portal section. Configure with:
Captive Portal
Enable
UAM Server
*insert access_url here*
UAM Secret Shared
*insert uam_secret here*
DNS mode
Auto
NAS ID
guestwifi
RADIUS Server IP
*insert radius_server_ip here*
RADIUS Server Authentication Port
1812
RADIUS Server Accounting Port
1813
MAC Authentication Mode
Local
List of URLs always accessible
Add the following entries one by one:
*insert access_domain here*
venuewifi.com
openweathermap.org
cloudfront.net
stripe.com
Note: If you wish to support social network logins, you also need to add the below entries for each network you plan to support.
Facebook:
facebook.com
fbcdn.net
akamaihd.net
connect.facebook.net
Twitter:
twitter.com
twimg.com
LinkedIn:
linkedin.com
licdn.net
licdn.com
Instagram:
instagram.com
Click Restart or reboot the device to commit changes.
The configuration is now complete.