Bienvenido a Soporte Purple

Everest Networks AP

Open a web browser and log in to your Everest Cloud (BaseCamp).

Step 1 - Wireless Network

Click Wireless Networks on the left menu, the Add at the top right. Configure with:

Network Name
Guest WiFi
SSID
Guest WiFi (or whatever you wish)
Security
Open
Captive Portal Enabled
Yes
Enter splash URL
*insert access_url here*
Session Timeout
86400
Select Third Party Integratior
Purple

Under Primary RADIUS Authentication Server

IP Address
*insert radius_server_ip here*
Port
1812
Shared Secret
*insert radius_secret here*
Confirm Shared Secret
as above

Under Primary RADIUS Accounting Server

IP Address
*insert radius_server_ip here*
Port
1813
Shared Secret
*insert radius_secret here*
Confirm Shared Secret
as above

Under Secondary RADIUS Authentication Server

IP Address
*insert radius_server2_ip here*
Port
1812
Shared Secret
*insert radius_secret here*
Confirm Shared Secret
as above

Under Secondary RADIUS Accounting Server

IP Address
*insert radius_server2_ip here*
Port
1813
Shared Secret
*insert radius_secret here*
Confirm Shared Secret
as above

Click Save at the top right.


Step 1 - Wireless Network

Click Walled Garden at the top and configure with:

Domain
*.*insert access_domain here*

Click the + icon to add. You now need to add the following domains in the same way:

Domains

*.venuewifi.com

*.cloudfront.net

*.openweathermap.org

*.stripe.com

Note: If you wish to support social network logins, you also need to add the below domains for each network you plan to support.

Facebook:

*.facebook.com

*.fbcdn.net

*.akamaihd.net

connect.facebook.net


Twitter:

*.twitter.com

*.twimg.com


LinkedIn:

*.linkedin.com

*.licdn.net

*.licdn.com


Instagram:

*.instagram.com

Finally, click in to the Wireless Network (Guest WiFi) you just created, select the AP's you wish to use this configration and then click Apply to APs at the top.


The configuration is now complete.


Compartir en línea
¿Fue útil este artículo?
Usuarios a los que les pareció útil: 0 de 0