Bienvenido a Soporte Purple

Ligowave NFT/LigoDLB Series

IMPORTANT: You require firmware version 7.54-5 or above in order to proceed.


Log in to the Ligowave AP web interface and click Wireless Configuration on the left. Under Wireless settings (AP) click Add virtual AP. Configure as below:

  • SSID: Guest WiFi (or whatever you wish)
  • Broadcast SSID: Enabled
  • Security: Hotspot (UAM)


Under UAM settings -> RADIUS tab:

  • Primary server: *insert radius_server here*
  • Secondary server: *insert radius_server2 here*
  • Server secret: *insert radius_secret here*
  • Authentication port: 1812
  • Accounting port: 1813


Under Captive portal tab:

  • Splash page type: External
  • Portal secret: *insert uam_secret here*
  • Login URL: *insert access_url here*


Under Network tab:

  • Internal IP address: 10.1.0.1
  • Network mask: 255.255.255.0
  • DNS server 1: 8.8.8.8
  • DNS server 2: 8.8.4.4


Under White/Black list tab add the following to the white list:

  • *insert access_domain here*
  • cloudfront.net
  • venuewifi.com
  • stripe.com
  • openweathermap.org


Additionally. if you wish to support social network logins, you also need to add the domains below for each network you plan to support.

Facebook
facebook.com
fbcdn.net
akamaihd.net
connect.facebook.net
Twitter
twitter.com
twimg.com
LinkedIn
linkedin.com
licdn.com
Instagram
instagram.com
akamaihd.net
Weibo
weibo.com
login.sina.com.cn
VKontakte
vk.me
vk.com


Click Done to Save.


Finally, click Save at the top to apply settings.

Compartir en línea
¿Fue útil este artículo?
Usuarios a los que les pareció útil: 0 de 0