Please connect an Ethernet cable from your existing router/network in to the port labelled "INTERNET" on the back of the Trendnet
Connect an Ethernet cable between port 1 on the back of the router and your computer.
Turn on the router and wait for it to boot (approximately 2 minutes).
Open a web browser and type http://192.168.10.1 in to the address bar
You will be prompted to log-in. The default username is "admin" and the password is printed on the label on the router itself.
Click on "Tools" on the left menu.
Click "Firmware" on the left sub-menu.
Click "Browse" on the Firmware Page, and select the firmware file that you have been provided.
Click on Upgrade. The upgrade process will now begin and may take up to 5 minutes to complete.
