Bienvenido a Soporte Purple

Avaya

  • Actualización

Important

Your device must be running 7.0 firmware or above to continue.

Logging in

Open a web browser and log in to your Avaya AP web interface.

Click "Security" on the left menu and select "External Radius" on the sub menu.

RADIUS Attribute Formatting

Under RADIUS Attribute Formatting:

Called-Station-Id Attribute Format: Ethernet-MAC
Station MAC Format: UC-hyphenated (XX-XX-XX-XX-XX-XX)
Accounting: On

Accounting Configuration

Under Accounting:

Accounting Interval: 300

Click Save changes to flash at the top right of the page.

SSID Configuration

Next, click on SSIDs on the left and then SSID Management on the sub menu.

Underneath the current SSID's, enter Guest WiFi and click Create.

This will create the new SSID. You now have access to the following settings. Please set the following:

SSID: Ticked
Brdcst: Ticked
Encryption: None/Open and untick the Global checkbox
WPR: Ticked

Next, scroll down the page and under SSID Guest WiFi Web Page Redirection Configuration, set the following:

Landing Page URL: *insert redirect_url here*
Server: External Login
Redirect URL: *insert access_url here*
Redirect Secret: *insert uam_secret here*

Next, under SSID Guest WiFi WPR Whitelist Configuration:

Please add the required domains one by one until you have them all listed. Please refer to this list.

SSID Guest WiFi Authentication Service Configuration

Next, under SSID Guest WiFi Authentication Service Configuration:

Enter the following information:

Authentication Server: External Radius

Under Primary:

Host / IP Address: *insert radius_server here*
Port: 1812
Shared Secret: *insert radius_secret here*
Verify Secret: as above

Under Secondary:

Host / IP Address: *insert radius_server2 here*
Port: 1812
Shared Secret: *insert radius_secret here*
Verify Secret: as above
Accounting: ticked

RADIUS Accounting Configuration

Under Primary:

Host / IP Address: *insert radius_server here*
Port: 1813
Shared Secret: *insert radius_secret here*
Verify Secret: as above

Under Secondary:

Host / IP Address: *insert radius_server2 here*
Port: 1813
Shared Secret: *insert radius_secret here*
Verify Secret: as above

Click Save changes to flash at the top right of the page.

 

Compartir en línea
¿Fue útil este artículo?
Usuarios a los que les pareció útil: 0 de 0