Bienvenido a Soporte Purple

D-Link DIR-825 C1

Please connect an Ethernet cable from your existing modem/router/network in to the port labelled "Internet/WAN" on the back of the D-Link

Connect an Ethernet cable between port 1 on the back of the D-Link and your computer

Turn on the router and wait for a few minutes

Open a web browser and type in to the address bar

You will be prompted to log-in. The default username is "Admin" and the password should be left blank (unless you have changed these prior).


Click on "Tools" at the top and then on "Firmware" on the left menu.

    Click on "Choose File" and select the firmware file that you have been provided


    Click on "Upload" and press to confirm. The upgrade process will now begin and take up to 5 minutes to complete.



    Compartir en línea
    ¿Fue útil este artículo?
    Usuarios a los que les pareció útil: 0 de 1