Bienvenido a Soporte Purple

GL.iNet

Please connect an Ethernet cable from your existing modem/router/network in to the port labelled "WAN" on the back of the GL.iNet

Connect an Ethernet cable between the port labelled "LAN" on the back of the GL.iNet and your computer

Turn on the router and wait for a few minutes


Open a web browser and type http://192.168.8.1 in to the address bar

If you have not already set up the router you will be prompted with the below screens. Select your desired options and then it will take you in to the main web interface.

 








Click on "Settings" at the top and then on "Firmware update" on the left.


Click on "
Choose File" and select the firmware file that you have been provided. The below screen will be presented:

IMPORTANT: Make sure you "deselect" the option for "Keep setting" else this will cause the device to not work correctly.

    IMPORTANT: Make sure you "deselect" the option for "Keep setting" else this will cause the device to not work correctly.

    Click on "Flash firmware" to confirm. The upgrade process will now begin and take up to 3 minutes to complete.




     

    Compartir en línea
    ¿Fue útil este artículo?
    Usuarios a los que les pareció útil: 0 de 0