Important
NOTE: The current supported models are: 2862, 3220, 2926, 2952, 2765, 2865, 2866, 2927, 2962, 3910 series.
Logging in
Log in to your Draytek Web Interface and click Hotspot Web Portal >> Profile Setup on the left menu.
Click an available Index, i.e. 1 and configure with:
| Enable this profile: | Yes |
| Portal Method: | External Server |
| Captive Portal URL: | *insert access_url here* |
| Redirection URL: | http://portal.draytek.com |
| Authentication Method: | External RADIUS Server |
| Enable: | Yes |
| Server IP Address: | *insert radius_server_ip here* |
| Destination Port: | 1812 |
| Shared Secret: | *insert radius_secret here* |
| Confirm Shared Secret: | as above |
| Enable Accounting: | Yes |
| Accounting Port: | 1813 |
Click OK to Save
| MAC Address Format: | AA-BB-CC-DD-EE-FF |
Domain Configuration
Click Save and Next. Now, click the Dest Domain tab and add the required domains, one per index. Please refer to this list.
Click Save and Next then configure with:
| Expired Time After Activation: | 0 days 6 hours 0 min (or whatever you wish) |
| HTTPS Redirection: | No |
| Captive Portal Detection: | Yes |
| Landing Page After Authentication: | *insert redirect_url here* |
| Applied Interfaces: | Select which SSID(s) you wish to enable the service on |
Final Step
Click Finish to Save. Please ensure you reboot the router before continuing as this is a pre-requisite for the setting to apply.