Welcome to Purple Support

Grandstream GWN Series AP

  • Updated
You will require firmware v1.0.7.12 or above to continue.

Log in to your Grandstream Cloud account at https://www.gwn.cloud

Step 1 - Captive Portal Policy

Click Captive Portal > Policy List on the left menu. Click Add then configure with the below settings:

Name
guestwifi
Splash page
External
Platform
Purple
External Splash Server
*insert access_url here*
RADIUS Server Address
*insert radius_server_ip here*
RADIUS Server Port
1812
RADIUS Server Secret
*insert radius_secret here*
RADIUS Accounting Server Address
*insert radius_server_ip here*
RADIUS Accounting Server Port
1813
RADIUS Accounting Server Secret
*insert radius_secret here*
Accounting Update Interval
120
Redirect URL
*insert redirect_url here*
Pre-Authentication Rules

Hostname: *insert access_domain here*

Service: All

 

Add the following entries in the same way:

 

venuewifi.com

openweathermap.org

cloudfront.net

stripe.com

 

Note: If you wish to support social network logins, you also need to add the below entries for each network you plan to support.

 

Facebook:

facebook.com

fbcdn.net

akamaihd.net

connect.facebook.net

 

Twitter:

twitter.com

twimg.com

 

LinkedIn:

linkedin.com

licdn.net

licdn.com

 

Instagram:

instagram.com

Click Save to continue.

Step 2 - SSID

Next, click SSIDs > Configuration on the left. Click Add then configure with the below settings:

Under Basic:

SSID
Guest WiFi (or whatever you wish)
Enabled
Yes

Under Access Security:

Security Mode
Open
Enable Captive Portal
Yes
Captive Portal Policy
guestwifi

Click Save to continue.

Share online:
Was this article helpful?
0 out of 0 found this helpful