Welcome to Purple Support

Datto Networking AP (CloudTrax v4 or above)

  • Updated

IMPORTANT: You need to be using CloudTrax v4 portal or higher AND also v6 firmware or higher before continuing.

Log in to the CloudTrax portal at https://ct4.cloudtrax.com

On the left, click on an SSID of your choice and configure with the following:

  • SSID name: Guest WiFi (or whatever you wish)
  • Enable: Enabled
  • Visible: Enabled
  • Authentication: Unticked
  • Splash page: Enabled
  • Splash page type: Hosted remotely
  • Splash page URL: *insert access_url here*
  • Splash page secret: *insert uam_secret here*
  • Splash page authentication type: RADIUS
  • Server address 1: *insert radius_server here*
  • Server address 2: *insert radius_server2 here*
  • Server secret: *insert radius_secret here*
  • Block unauthenticated users: Enabled

Under Walled Garden, enter the following domains (one per line):

  • *insert access_domain here*
  • venuewifi.com
  • openweathermap.org
  • cloudfront.net
  • stripe.com

If you wish to support social network logins, you also need to add the domains below for each network you plan to support, to the end of the 'Walled Garden' list above.

Facebook facebook.com
fbcdn.net
akamaihd.net
connect.facebook.net
Twitter twitter.com
twimg.com
LinkedIn linkedin.com
licdn.net
licdn.com
Instagram instagram.com
Weibo weibo.com
login.sina.com.cn
VKontakte vk.me
vk.com

 

Click Save Changes at the top right to finish.

 

 

 

 

 

 

Share online:
Was this article helpful?
0 out of 0 found this helpful