Welcome to Purple Support

Avaya

  • Updated

IMPORTANT NOTICE: Your device must be running 7.0 firmware or above to continue.

 

Open a web browser and log in to your Avaya AP web interface.

Click "Security" on the left menu and select "External Radius" on the sub menu.

Under RADIUS Attribute Formatting:

  • Called-Station-Id Attribute Format: Ethernet-MAC
  • Station MAC Format: UC-hyphenated (XX-XX-XX-XX-XX-XX)
  • Accounting: On

Under Accounting:

  • Accounting Interval: 300

Click Save changes to flash at the top right of the page.

 

Next, click on SSIDs on the left and then SSID Management on the sub menu.

Underneath the current SSID's, enter Guest WiFi and click Create.

This will create the new SSID. You now have access to the following settings. Please set the following:

  • SSID: Ticked
  • Brdcst: Ticked
  • Encryption: None/Open and untick the Global checkbox
  • WPR: Ticked

Next, scroll down the page and under SSID Guest WiFi Web Page Redirection Configuration, set the following:

Landing Page URL: *insert redirect_url here*

Server: External Login

Redirect URL: *insert access_url here*

Redirect Secret: *insert uam_secret here*


Next, under SSID Guest WiFi WPR Whitelist Configuration:

IMPORTANT: You will need to add the below entries one by one until you have them all listed.

*.*insert access_domain here*

*.venuewifi.com

*.openweathermap.org

*.cloudfront.net

*.stripe.com

 

If you wish to support social network logins, you also need to add the domains below for each network you plan to support

 

Facebook X LinkedIn Instagram
*.facebook.com

*.fbcdn.net
*.akamaihd.net
*.connect.facebook.net
*.twitter.com

*.twimg.com
*.linkedin.com

*.licdn.net

*.licdn.com

*.instagram.com

 

Next, under SSID Guest WiFi Authentication Service Configuration:

Enter the following information:

  • Authentication Server: External Radius

Under Primary:

  • Host / IP Address: *insert radius_server here*
  • Port: 1812
  • Shared Secret: *insert radius_secret here*
  • Verify Secret: as above

Under Secondary:

  • Host / IP Address: *insert radius_server2 here*
  • Port: 1812
  • Shared Secret: *insert radius_secret here*
  • Verify Secret: as above
  • Accounting: ticked

Under Primary:

  • Host / IP Address: *insert radius_server here*
  • Port: 1813
  • Shared Secret: *insert radius_secret here*
  • Verify Secret: as above

Under Secondary:

  • Host / IP Address: *insert radius_server2 here*
  • Port: 1813
  • Shared Secret: *insert radius_secret here*
  • Verify Secret: as above

 

Click Save changes to flash at the top right of the page.

 

 

 

 

Share online:
Was this article helpful?
0 out of 0 found this helpful