In the Network Application, on the left menu, go to Settings > Networks. Under RADIUS Servers, click Create New and configure with:
| Name | radsecure |
| RADIUS Assigned VLAN Support | Wireless Networks |
| TLS | Enabled |
| Client Certificate | Provided by Purple Support |
| Private Key | Provided by Purple Support |
| CA Certificate | Provided by Purple Support |
| IP Address | 34.150.158.147 |
| Port | 2083 |
| Shared Secret | radsec |
| Accounting Servers | Enabled |
| IP Address | 34.150.158.147 |
| Port | 2083 |
| Shared Secret | radsec |
| Interim Update Interval | Enabled - 240 seconds |
Click Add to save.
Next, go to Settings > WiFi. Click Create New and configure with:
| Name | Purple (or whatever you wish) |
| Application | Hotspot |
| Hotspot Type | Passpoint |
| Venue Name | Purple (or your venue name) |
| Network Type | Private Network |
| IP Address Type Availability | IPv4: Single NATed private IPv4 address IPv6: Not available |
| NAI Realm | Click Add and configure: Name: **realm** EAP Method: EAP-TTLS Sub-Methods: PAP |
| Domain List | **realm** |
| Operator Friendly Name | Purple |
| Security Protocol | WPA2 Enterprise |
| External RADIUS Server | radsecure |
| PMF | Disabled |
| Client Device Isolation | Enabled |
| NAS ID | Custom: **nasid** |
Click Apply Changes to save.
Configuration Complete
The configuration is now complete.