| IMPORTANT: You require firmware version 7.54-5 or above in order to proceed. |
Wireless Configuration
Log in to the LigoWave AP web interface and click Wireless Configuration on the left. Under Wireless settings (AP), click Add virtual AP. Configure with the following settings:
| SSID | Guest WiFi (or whatever you wish) |
| Broadcast SSID | Enabled |
| Security | Hotspot (UAM) |
Under UAM settings > RADIUS tab
| Primary server | *insert radius_server here* |
| Secondary server | *insert radius_server2 here* |
| Server secret | *insert radius_secret here* |
| Authentication port | 1812 |
| Accounting port | 1813 |
Under Captive portal tab
| Splash page type | External |
| Portal secret | *insert uam_secret here* |
| Login URL | *insert access_url here* |
Under Network tab
| Internal IP address | 10.1.0.1 |
| Network mask | 255.255.255.0 |
| DNS server 1 | 8.8.8.8 |
| DNS server 2 | 8.8.4.4 |
Under the White/Black list tab, add the required domains to the whitelist. Please refer to this list.
Click Done to Save.
Configuration Complete
Finally, click Save at the top to apply settings. The configuration is now complete.