| IMPORTANT: You need to be using CloudTrax v4 portal or higher AND also v6 firmware or higher before continuing. |
Logging in
Log in to the CloudTrax portal at https://ct4.cloudtrax.com
SSID Configuration
On the left, click on an SSID of your choice and configure with the following settings:
| SSID name | Guest WiFi (or whatever you wish) |
| Enable | Enabled |
| Visible | Enabled |
| Authentication | Unticked |
| Splash page | Enabled |
| Splash page type | Hosted remotely |
| Splash page URL | *insert access_url here* |
| Splash page secret | *insert uam_secret here* |
| Splash page authentication type | RADIUS |
| Server address 1 | *insert radius_server here* |
| Server address 2 | *insert radius_server2 here* |
| Server secret | *insert radius_secret here* |
| Block unauthenticated users | Enabled |
Under Walled Garden, enter the required domains one per line. Please refer to this list.
Click Save Changes at the top right to finish.
Configuration Complete
The configuration is now complete.